Amsoil Power Foam

APFSC

January 13th, 2013

  • Cuts through grease and rust
  • Reduces pollution from rough-running, dirty engines
  • Releases stuck choke mechanisms
  • Reduces engine ping
  • Removes varnish, gum, and carbon build-up
  • Helps improve fuel economy in two- and four-stroke gas engines

AMSOIL’S Power Foam Engine Cleaner and Degreaser (APF) cleans the entire combustion intake system of your engine to provide enhanced engine performance. It works to remove carbon deposits, varnish, and gum to provide better performance and fuel economy. Power Foam is effective in four-cycle and two-cycle gas engines. It keeps the intake system running properly by cleaning intake manifolds, intake valves, and throttle plates. Power Foam keeps injector systems and carburetors properly tuned and helps reduce engine ping.

Power Foam is safe for catalytic converters, emission control devices, and fuel injectors; it won’t damage plastic materials, rubber parts, gaskets, or seals normally used in gas engines.

AMSOIL Power Foam contains specially formulated high-boiling solvents and a powerful foaming agent that penetrates grease and rust. Power Foam, when applied, helps you loosen or tighten bolts easily when it cuts through rust. It leaves no residue to attract dirt, since it washes away easily.

Recommendations: Do not overspray. Avoid contact with exterior plastic parts and hoses. Not recommended for use in engines with MAF (Mass Airflow Sensor) or in diesel engines.

Directions: Bring engine to normal running temperature and remove the air cleaner assembly. Spray the entire can of foam into the intake while the engine is running. Turn off the engine and let it sit for five to ten minutes, then restart and drive it to blow out all of the build-up.

AMSOIL Power Foam is available for purchase in 18-oz spray cans. Power Foam is not available in California.

 

About us      Commercial Accounts      Sell Amsoil      Contact Us      Privacy Policy